Pullover jacket and minidress

A jacket without a fastener with a long openwork shawl collar made of sectionally dyed yarn will make an excellent pair with an airy, fitted dress with multi-colored stripes.

Jacket sizes: 42/44 (46/48) 50/52

You will need: 550 (600) 650 g beige yarn Lana Grossa Divino Print (75% cotton, 25% viscose, 110 m/50 g); knitting needles number 4.

Knotted edge: Slip the 1st stitch of each row as a knit stitch, knit the last stitch of each row. All details are knitted with knotted edges.

Facial surface: persons R. – persons p., out. R. - purl P.

Openwork pattern: knit according to the pattern. Start with loops before rapport, repeat repeat loops, end with loops after repeat. Repeat 1st and 2nd rows.

Highlighted decreases: at the beginning of the row: after the 11th stitch, knit 2 stitches together with a broach (slip 1 stitch as knit, 1 knit and pull it through the removed stitch); at the end of the row: before the last 11 sts, knit 2 sts together.

Knitting density.

Persons stitch: 19 p. and 28 r. = 10 x 10 cm.

Openwork pattern: 21 p. and 28 r. = 10 x 10 cm.

Description of work

Back: dial 112 (120) 128 sts and knit. satin stitch To narrow, perform the highlighted decreases on both sides in the 7th row. from the cast-on edge, then in every 8th row. – 5 times and every 6th r. – 7 more = 86 (94) 102 p. After 34 (35) 36 cm = 96 (98) 102 p. from the cast-on edge, close on both sides for the armholes 4 p., then in every 2nd r. – 1 x 3, 1 x 2 and 1 x 1 p. = 66 (74) 82 rub. After 18 (19) 20 cm = 50 (54) 56 r. from the beginning of the armhole, close on both sides for shoulder bevels 3 (4) 5 p., then in every 2nd r. – another 3 x 4 (5) 6 sts. After 55 (57) 59 cm from the cast-on edge, close off the remaining 36 sts of the neckline.

Left shelf: cast on 38 (42) 46 sts and knit. satin stitch Make the narrowing, armhole and bevel of the shoulder on the right edge as for the back. This will complete all the loops.

Right shelf: knit symmetrically.

Sleeves: dial 74 (78) 82 sts and knit. satin stitch To narrow, close on both sides in the 13th row. from the cast-on edge 1 p., then in every 14th p. – 2 x 1 p. and in every 12th p. – another 3 x 1 p. = 62 (66) 70 p. After 30 cm = 84 r. from the cast-on edge, close on both sides to roll up the sleeves 3 p., then in every 2nd r. – 18 x 1 and 1 x 2 p., then bind off the remaining 16 (20) 24 p.

Left bar: cast on 48 sts, knit 1 purl. R. faces., then knit with an openwork pattern. After 55 (57) 59 cm = 155 (159) 165 rubles. from the cast-on edge, make a mark on the right and knit another 10 cm = 28 r., then close from the right edge to bevel the shoulder 5 sts, then in every 2 r. – another 8 x 5 and 1 x 3 sts. At this point, all loops will be closed. 

Right bar: knit symmetrically.

Assembly: sew the shoulder seams, as well as the seam of the beveled edges of the planks so that it is on the wrong side. Sew the strips to the vertical edges of the shelves up to the mark, the remaining edge in the gap to the neckline. Sew in the sleeves, sew side seams and sleeve seams.

Dress

Dress sizes: 42 (46)

You will need: 100 (150) g each of green and black Lana Grossa Divino yarn (75% cotton, 25% viscose, 110 m/50 g) and 100 (150) g each of gray-green, pink and 150 (200) g beige yarn Lana Grossa Divino Print (75% cotton, 25% viscose, 110 m/50 g); knitting needles No. 4; hook No. 3.5.

Garter stitch: persons and out. R. – persons P.

Facial surface: persons R. – persons p., out. R. - purl P.

Wavy pattern A: knit according to pattern A. Start with 8 (12) sts before rapport, repeat repeat loops, finish 9 (13) sts after rapport. Repeat 1st and 2nd rows. 23rd r. - a series of decreases - before and after the rapport, 1 p. is decreased, in the rapport - 2 p. 23rd and 24th p. perform 1 time.

Wavy Pattern B: knit like wavy pattern A, but according to pattern B. Start with 7 (11) sts before rapport, repeat repeat loops, finish 8 (12) sts after rapport. Repeat 1st and 2nd rows.

Alternating stripes: * 2 rub. black, 2 r. pink, 2 r. green, 2 r. grey-green, 2 r. beige thread = 10 rub. Repeat from *.

Alternating patterns: 24 rub. wavy pattern A (only 1st and 2nd r.), 26 r. persons smooth, 24 rub. wavy pattern A (only 1st and 2nd r.), 26 r. persons smooth, 24 rub. wavy pattern A (repeat the 1st and 2nd rows 11 times, then perform a series of decreases and finish in the next purl row), 26 rubles. persons smooth, 24 rub. wavy pattern B, then knit. satin stitch

Knitting density, alternating patterns: 21 p. and 27 r. = 10 x 10 cm.

Attention! The front side of the work will become the back side of the product.

Description of work

Back: On knitting needles No. 4, cast on 99 (107) sts with beige thread and knit for a placket of 1 cm = 3 p. garter stitch. Then alternate patterns and at the same time alternate stripes. After 46 cm = 124 r. 12 sts are subtracted from the bar = 87 (95) sts. After 22 cm = 60 r. from a number of decreases close in the next. purl row on both sides for armholes 3 p., then in every 2nd p. – 1 x 2, 3 x 1 p., in every 4th p. – 3 x 1 p. and in every 6th p. – another 2 x 1 p. = 61 (69) p.

After 14 (15) cm = 38 (42) r. from the beginning of the armhole, close the middle 27 stitches for the neckline and then knit separately. To round it, close the edges of the cutout in every 2nd r. 1 x 3, 1 x 2 and 4 x 1 p. After 6 cm = 16 r. From the beginning of the neckline, close off the remaining 8 (12) shoulder stitches. 

Before: knit like a back, but with a deeper neckline. To do this, simultaneously with the beginning of the armholes (1 cm = 4 r. from the beginning of the armholes), close the middle 27 sts and knit further separately. To round the neckline, close from the inner edge in every 2nd r. 1 x 3, 1 x 2 and 4 x 1 p. Close the remaining shoulder loops from the outer edge at the height of the back. Finish the second side symmetrically.

Assembly: make the seams so that the front side of the parts is on the wrong side. side. Tie the neckline with beige thread 1 p. Art. b/n and 1 r. “crawfish step” (art. b/n from left to right).